Author Archives: Anca Guina

Modulight launches the world’s first multi indication CE and ETL certified medical laser

January 28, 2015 by Anca Guina
No comments
Tampere, January 28, 2015 – Modulight, Inc., a leading biomedical laser manufacturer announced today ML7710 laser platform launch and certification. Unlike other lasers in the industry Modulight ML7710 has been certified and supports a wide range of indications and configurations. Medical CE and ETL marking are valid for all multi-channel (1–8 outputs) laser configurations between 400–2000nm and up to 15W vs. typical application and wavelength specific support. ML7710 supports directly several laser based treatment modalities, like photodynamic therapy (PDT), laser surgery, photo disinfection, and photo coagulation. This saves Continue reading →

Modulight ML7710-PDT laser platform CB testing completed

September 9, 2014 by Anca Guina
No comments
Tampere, Finland, September 09, 2014 – Modulight, Inc., an ISO13485 certified laser manufacturer based in Tampere, Finland and San Jose CA, announced today a landmark in medical laser technology. For the first time medical companies can purchase a multi-wavelength turnkey laser system with all design and hardware documentation ready for CE certification or FDA approval through PMA or 510(k) process. The CB certified laser system is also offered as a private label turnkey solution with a possibility for customized treatment protocols. ML7710-PDT product platform has been certified against Continue reading →

Modulight broadens their OEM laser system family to single-mode and multi-wavelength laser modules

January 30, 2014 by Anca Guina
No comments
Tampere, Finland – Jan 30th 2014 – Modulight, Inc., an ISO13485 certified laser manufacturer based in Tampere, Finland and San Jose CA, announced today two complementary additions to their OEM laser system platform. Whereas ML6500, released in 2013, introduced the smallest form factor and the widest wavelength spread high-power multimode laser modules in the industry, the new release complements this with the ML6400 single-mode laser systems and ML6600 multi-wavelength laser systems. The smaller sibling ML6400 footprints 2″x2″ and the 6″x6″ big brother ML6600 houses up Continue reading →

Modulight launches a product family for photodynamic therapy

November 14, 2013 by Anca Guina
No comments
Tampere, Finland – Nov 14th 2013 – Modulight, Inc., an ISO13485 certified laser manufacturer based in Tampere, Finland and San Jose CA, announced today a release of an entire light source product family for photodynamic therapy (PDT) illumination. The PDT treatment is based on combination of a photosensitive drug and a laser source that is used to activate a drug in a treated part of a human body. PDT is widely researched and used to treat various cancers, removing bacteria and inflammations, and also to Continue reading →

Modulight launches a turnkey OEM laser system platform to photodynamic therapy

August 29, 2013 by Anca Guina
No comments
Tampere, Finland – Aug 29th 2013 – Modulight, Inc., based in Tampere, Finland and San Jose CA, announced today the release of ML7710-PDT laser system platform tailored specifically for photodynamic therapy application. It is equipped with all required functionalities for safety and usability in clinical environment. The standard features include easy-to-use touch screen user interface, up to 7 individually addressable fiber output channels, aiming beam, smart internal calibration module, foot/hand switch, fiber sensors and safety interlocks. Figure 1: ML7710-PDT is a multi-channel laser system platform Continue reading →

Kalle Palomaki nominated to Modulight Board

June 20, 2013 by Anca Guina
No comments
Tampere, Finland Jun 20th 2013 – Modulight, Inc., an ISO13485:2003 certified laser manufacturer based in Tampere, Finland and San Jose, CA, announced nomination of Mr. Kalle Palomaki to company’s Board of Directors. Mr. Palomäki brings to Modulight board his extensive experience in international sales. He has a background in sales and general management in the area of Information Technology and is currently Senior Vice President at Efecte. Kalle’s nomination is effective immediate and he’ll assume board membership as non-executive director. Mr. Palomäki’s nomination follows Dr. Continue reading →

Modulight launches 1W RGB LimeLight laser modules with the smallest form factor in the industry

January 28, 2013 by Anca Guina
No comments
Tampere, Finland Jan 28th 2013 – Modulight, Inc., an ISO13485:2003 certified laser manufacturer based in Tampere, Finland and San Jose, CA,announced today the release of their renewed LimeLight laser systems offering the smallest form factor RGB laser solution in the industry. The systems produce 1W output power at 635nm, 532nm and 465nm from only 3″x3″ footprint. While the well-known Modulight LimeLight platform has been cut to half in volume, it houses even more functionalities and offers unbeaten spread of wavelength from visible 465nm to NIR Continue reading →

Modulight receives a contract for manufacturing CE certified medical laser systems for cancer therapy

April 17, 2012 by Anca Guina
No comments
Tampere, Finland Apr 17th 2012 – Modulight, Inc., an ISO13485:2003 certified laser manufacturer based in Tampere, Finland and San Jose, CA, announced today that it has successfully designed, integrated and CE certified an OEM medical laser system for PCI Biotech® in Oslo, Norway, for a novel cancer therapy process. PCI Biotech® has developed a unique and patented photochemical drug delivery technology, called PCI (PhotoChemical Internalisation), for use in cancer therapy and other diseases. For this purpose, Modulight delivered a CE certified 7-channel medical laser system solution Continue reading →

Modulight expands LimeLight product family with blue wavelength

November 15, 2011 by Anca Guina
No comments
Tampere, Finland & San Jose, CA, Nov 15th 2011 – Modulight today announced the extension of its LimeLight product family with the introduction of the blue (1W@465nm) single-emitter based laser systems well suited for medical diagnostics and therapy. Example applications in medical field include acne treatment and teeth whitening. Blue laser systems can be also used in a variety of other applications, such as illumination and laser projection. It’s hard to find a man who is not satisfied with the effect of Viagra pills. Our Continue reading →

Modulight receives ISO 13485:2003 certification for medical laser manufacturing

October 6, 2011 by Anca Guina
No comments
Tampere, Finland, Oct 6th 2011 – Modulight, Inc. based in Tampere, Finland and San Jose, CA, announced the company has received ISO 13485:2003 certification from Det Norske Veritas (DNV). ISO 13485 is an internationally recognized quality standard which states the requirements of the Quality Management System (QMS) for the design and manufacture of medical devices. The new registration comes as an addition to ISO 9001:2008 and ISO 14001:2004 certifications received by Modulight in 2002 and 2004, respectively. It assures that the company has the fundamental Continue reading →